Planet Zoo – How to Make a Waterfall

Building a Waterfall

Creating the area

Go to landscaping and select the pull tool. Set the size to 11m. Make a small hill where you want the waterfall. Use the flatten tool on the hill. Make the flattened area about 4 times wider than your tool.

Making a lake

Use the push tool to make a hole in front of the hill. Flatten it to make a pond. Create a small cave in the hill. Clean up the cave edges and inside.

Adding a barrier

Go to barriers and select glass. Put it at the cave entrance. Make it twice as long.

Putting in water

Select rough water from landscaping. Add water to the cave behind the glass. Lower the glass to match the water level. Fill the pond with water.

Decorating

Go to nature and select rocks. Place flat rocks against the glass to cover it. Add rocks around the hill and cave. Put items on top of the hill.

Creating the waterfall

Go to effects in construction. Search for “top” water and use the 10cm version. Place it on the rocks above the barrier. Add more to cover the top. Search for “mid” water and place it under or with the top water. Search for “bottom” water and place it at the base of the rocks. Finally, search for “rapids” and add your choice.