Wooden Spiral Staircase
By MayO2.
Draw a flower-shaped railing line around the round platform.
Draw a path around the platform close to the wall.
Distribute the dots of the curved line around the circle, like the rays of the sun, one at a time, in a zigzag pattern. Line up the dots along the wall of the round platform. Line up the odd dots around the circle at a distance equal to the length of a step. The round platform can be moved away while editing. This will make it easier to grab and move the curve dots.
Cut the zigzag line into three-point segments so that each arch has three dots, two inside and one outside the circle. Each three-point segment will be a step in the form of a bracket.
Align the heights of the arches, like on a spiral staircase.
Two of the arch dots should be inside the round platform standing on the grass, and one middle dot should be at a distance of the length of a step. In this case, the arch will turn into brackets, similar to steps, that will protrude from the wall of the circular platform.
Using the trace eraser, erase the grass along the edge of the wall of the circular platform so that the arch turns into an overhanging step.
Be the first to comment